Activated Carbon Flower Petals + Plant-Based Multipurpose Oil

Tulips, red, and yellow roses, are blackened by immense heat to, 'carbon activate.'  

Air filters to begin with, sterilant and preservative by complete definition... these kill fungus, on the floor, in the cupboard, or even on skin.  The catalyst is activated carbon, and being nutritious subjects they're completely non-toxic.  Even use them rubbed or crumbled onto hair and scalp for a detoxification never available before!

Sprinkle them on the floor, whole, or crumbled.  Pests can't eat them because they're contaminated by the floor, or other surface treated...

To Make Plant-Based Multipurpose Oil:

Place enough in a sealable container with vegetable oil to uniformly spread throughout the vegetable oil for the renewable multipurpose oil that treats metal and other surfaces and is completely non-toxic!  At least one (1) layer should be filled to the layer's top with vegetable oil or proportioned to approximately that ratio.  

More sure finish -> More carbon flower petals  Less necessity -> Less carbon flower petals

Shake the sealed container, then heat in microwave on LOW setting for thirty (30) seconds, being careful not to overheat.  CAUTION: VEGETABLE OIL CAUSES THIRD DEGREE BURNS.  Over 30 seconds on LOW setting can MELT microwave-safe containers.

(Vegetable, and all oil, does not evaporate, like water does when it heats.  Therefore, oil will only get hotter, rising in temperature, as it does not evaporate, though it may look like it is not.  This makes it a severe burn risk.)

Shaking at anytime with lid sealed makes a re-sterilization of the formula, so never hurts.)  Heating is not absolutely necessary but ensures formula will be uncontaminated for a superior application.  After initial heat-sterilization, it should not need to be repeated unless required.

Heating CAEFP Plant-Based Multipurpose Oil bonds the CAEFP to the vegetable oil and kills any bacteria present.  Still-warm/hot CAEFP-Oil makes a formal finish and a stronger/more intense treatment for more critical applications.  

Don't overheat, though, because vegetable oil never evaporates, thus, causes third-degree burns on skin.  Rinse with cool water immediately if burned.  

This Flower Petal Multipurpose Oil kills rust, corrosion; and, sterilizes metal, wood, plastic, and other surfaces.  It makes a clear-coat finish that repels water, protecting paint, bare wood, and metal, etc., with spot-testing recommended.  Many antiques can be refurbished with this, sterilized by one treatment, thus, saved from their destruction!

To Use Plant-Based Multipurpose Oil:  

Use the included glass dropper to apply the oil, and polish it off while spreading it evenly-coated with a clean cloth.  (A brush can be used too.). Plant-Based Multipurpose Oil will loosen dirt as it is a lubricant.  Make sure there will be no drips remaining while it dries.  An impervious mint-condition can be achieved.

Allow treated surface(s) to dry before contact with moisture, dirt, or other use.  (When using it as a lubricant it can be used immediately, although drying is proper.)  

Sun makes an excellent drying method, as well highly-ventilated placement.  Be sure all dirt is removed.    

If dampened before drying, or oil dries too slowly because of excess, surface becomes sticky, thus, collects dust.  If drying process fails, repeat the application to clean off improper coat, and allow to dry completely.

Activated Carbon Flower Petals + Carbon Flower Petal Multipurpose Vegetable Oil = 1 low price for 2 great sterilant/preservatives in one!

"Flower Power," never ends.  At The Environment Factory, "Nature is our warehouse."